Converting MUGEN 1.0 stages to MUGEN 1.1

[Ace-Million]

and cut high. Are there uses just to cut the bottom and top part off? to avoid the afterimages on black screen

[Ryon]

exactly.

 

your good.

[abls1]

Cut high and low do not work at all in some stages!  boundhigh,boundlow,boundleft,boundright works very well..

 

If you are getting a black bars in top edit the boundhigh sample  original -200 edit: -75  the lowest number you should use is 0 if you use a positive number like 1 the stage will move up and the black low bar might show up

 

if the black bars are showing in the bottom then lower the boundlow to a negative number I start at -15 too much might cut too much of the bottom

 

Left and right are about the same concept:

 

sample boundleft -300  edit to -200 and I recommend increments of -50 but play around with number and see if you cut off too much

Sample boundright  300 edit to 200 and play around with numbers

 

And the easiest way to avoid all black bars from boundleft,boundrigh, boundlow,boundhigh is decreasing the zoomout  start at .7  max .9

 

There other difficulties when doing more complex stages which can requeire stages to have some edited elements but this is another tutorial and has worked for me 80% of the time

 

Lastly since stating posting  I have edited 300+ stages so forsure my advice is solid

[Duralminn]

Thanks for really useful tip!

[Celest]

Sir this Tutorial is magnificent.

[Gamer251]

Oh, didn't know people still view this :v

[ArcBeast]

anyone can help me with 640x480 stages somehow it not working or show up at mugen 1.1 but only working if I put it at extra stage I was like WTF why only working extra and not working as character stage for arcade